13
1 Food pusher: use this utensil for pushing down the ingredients in the feed chute.
2 Juicer cover: with feed chute for filling in your food. The pulp spout will guide
the pulp into the pulp container.
3 Locking arm: lift this handle up and lock it in the vertical position for fixing the
juicing system onto the motor base.
4 Juice collector – collecting the juices and directing the juices via the juice spout
into the juice jug or your mug. The pulp guttering guides the pulp into the pulp
container.
5 Pulp container: will automatically collect the pulp. The handling groove enables
a firm grip.
6 Display showing the selected operating speed 1 to 5.
7 Motor base: mandatory for all purposes; with pulp container protrusion at the
bottom and spout groove in the top plate, ensuring that the juicing system is
positioned in correct orientation.
8 Pouring shield: holds back the froth and avoids splashing during pouring, when
installed in the juice jug.
9 Selection dial: turn this dial for setting the desired speed.
10 1.25 litre juice jug with juice jug lid and removable pouring shield – perfectly
adapted to the shape of the juice spout.
11 Rubber feet ensuring a stable stand on smooth and solid surfaces.Juicing System
(Basic System)
Not visible:
Power cord, Cable storage in the base plate of the motor base.
Drive rotor: transmitting the motor power to the processing system.
Drip-stop: turn the stainless steel sleeve by the small black handle to avoid drip-
ping after juicing.
Juicing sieve with drive coupling – containing sharp blades for cutting and a
fine mesh in the rim for separating juices and pulp.
On/Off switch at the rear, ensuring that the motor can be switched off completely.
To Next Page
Loading...
Need help?
General
