Gastroback Easy Juicer User Manual

10
1
WARNING: Always turn the appliance off and
pull the plug when the appliance is not in use or
when disassembling, moving or cleaning
the appliance. Never let water or other liquids
run into the motorblock. Never clean the line
cord or the motorblock in the dishwasher, poor
liquids over the appliance or douse or dip it in
water or other liquids.
Step 1:
Push the ‘ON/OFF’ button on the Easy Juicer to
‘OFF’ and then switch ‘OFF’ at the power outlet
and unplug. Important Wait for the filter basket
to stop spinning before continuing to step 2
(Picture 1).
Step 2:
Pull the locking arm back over the grooves on
either side of the juicer cover (Picture 2). Move
the locking arm down.
Step 3:
Remove the integrated pulp container (prefer-
ably with the juicer cover, stainless steel mesh
filter and food pusher in place) by lifting verti-
cally from the motor base. Take it to the sink for
easy cleaning (Picture 3).
Step 4:
Remove the food pusher by lifting it vertically.
Step 5:
Remove the juicer cover from the integrated
pulp container by lifting it vertically. Remove
any pulp from the cover by using the flat end of
the brush to gently scrape down the sides.
Disassembling your Gastroback Easy Juicer
2
3
!

Gastroback Easy Juicer Specifications

General

Brand	Gastroback
Model	Easy Juicer
Category	Juicer
Language	English