5
1. Make sure iron is unplugged.
2. Regular tap water should be used.
In areas with extremely hard water,
the use of distilled or filtered water
is highly recommended.
3. Slowly pour water into water fill
opening until water level reaches
the top of the Water Window
(8 ounces). Never overfill.
NOTE: Never place anything in your
iron except water. Products like liq-
uid starch will damage your iron and
clothing if placed in the water tank.
Filling the Water Tank
Setting
Ironing Instructions
Dry iron on the wrong side of the fabric.
Dry iron; use spray if necessary.
Dry iron; use spray if necessary.
Iron on the wrong side of the fabric.
Use a pressing cloth and steam iron.
Iron while fabric is still damp.
Iron on the wrong side of fabric.
Iron while still damp.
Iron on wrong side while fabric is still damp.
0
1
2
3
4
5
6
7
8
9
Dry Iron
To Iron
Off/Clean
Acetate
Nylon
Acrylic
Silk, Lycra
Wool
Polyester
Rayon
Cotton
Linen
Steam Range
NOTE: To dry iron on settings 4-9, empty all water from the tank.
Temperature Dial and Fabric/Setting Chart
Ironing Tips
• Always check fabric content before
ironing. If the fabric is a blend, use
the lower temperature setting.
• If the fabric content is unknown, use
the lowest temperature setting and test
on an inside seam of the garment.
• If ironing several items, start ironing
the items which need the lowest
temperature setting first. An iron heats
up much faster than it cools down.
• To maintain the quality of the
soleplate, never iron over zippers,
pins, buttons, or anything metal.
• Use caution when ironing around
plastic buttons and zippers as these
may melt.
Water
Window
To Next Page
Loading...
Need help?
General
