To Next Page

To Previous Page

14 49-1000501 Rev. 0

Installation Instructions

INSTALLING THE DOOR HANDLE

PLASTIC HANDLE

Installthehandlefastenerintotheholeonthe

freezerandfreshfooddoors.Thefasteners

correspond with the handle side (the side

opposite the hinge).

STAINLESS STEEL HANDLE

Attach plastic bushing to the door with the

screwonbothfreezerandfreshfooddoors.The

fasteners correspond with the handle side (the

side opposite the hinge).

HANDLE INSTALLATION

1.Attachhandletofreezerdoorbyslidinghandle

up onto plastic bushing or fastener with the

screws at the bottom of the handle.

2. Attach handle to fresh food door by sliding

handle down onto plastic bushing or fastener

with the screws at top of handle.

BADGE AND PLUG BUTTON

INSTALLATION

1. Place a plug button on the opposite side of the

fresh food door across from the handle.

2. Remove the backing on the GE Appliances

badge and carefully place it in the hole

oppositethehandleonthefreezerdoor.Be

sure the badge is oriented the correct way

before applying it to the door.

Handle Fastener

NOTE: Be sure to remove

lmbeforehandleinstallation,

if applicable)

Plug

button

Badge

Bushing

with Screw

INSTALLATION INSTRUCTIONS

GE 16 Owner's Manual

Other manuals for GE 16