22
Installation Instructions
REMOVE THE BASE GRILLE
(if needed)
If, after removing the freezer drawer and
refrigerator door, the refrigerator will still not
fit through a doorway, the base grille can be
removed.
Remove the base grille by removing the
screws.
3
A
REMOVING THE FREEZER DRAWER
REMOVE THE BASKET
Open the freezer drawer until it stops.
The freezer basket rests on a frame inside the
freezer drawer. Lift the basket up at the back.
Lift the front up and lift the entire basket up
and out of the drawer.
1
A
B
C
The freezer drawer can be removed, if needed,
to fit through tight areas.
Read these instructions completely and carefully.
REMOVE THE DRAWER FRONT
FROM THE SLIDES
Remove the screw on each side of the railing.
2
A
REMOVE THE DRAWER FRONT FROM
THE SLIDES (cont.)
Lift up on both sides of the freezer drawer
handle to separate the drawer railings from
the rail assemblies.
Set the drawer front on a non-scratching
surface.
Push the rail assemblies back into locking
position.
2
B
C
D
Rail Assembly
Drawer
Assembly
Screw
To Next Page
Loading...
Need help?
General
