49-60646-6 Rev. 7 21
INSTALLATION INSTRUCTIONS
Installation Instructions
MOVING THE REFRIGERATOR
LOADING THE REFRIGERATOR
ONTO A HAND TRUCK
Leave all tape and door pads on doors until
the refrigerator is in its final location.
To move the refrigerator, use a padded
hand truck. Center the refrigerator on the
hand truck and secure the strap around the
refrigerator.
DO NOT OVERTIGHTEN THE STRAP.
1
REMOVE THE BASE GRILLE
Remove the grille by removing the two
Phillips head screws.
2
,IWKHUHIULJHUDWRUPXVWJRWKURXJKDQ\
HQWUDQFHWKDWLVOHVVWKDQ´ZLGHWKH
doors must be removed. Proceed to
Step 3.
DO NOT remove the handles.
,IDOOHQWUDQFHVDUHPRUHWKDQ´ZLGH
VNLSWR,QVWDOOLQJWKH5HIULJHUDWRU.
DISCONNECT THE WATER
COUPLING (on some models)
,IWKHUHIULJHUDWRUKDVDZDWHUGLVSHQVHU
there is a water line from the cabinet into the
ERWWRPKLQJHRQWKHIUHH]HUGRRUWKDWPXVWEH
disconnected.
To disconnect, push in on the white collar of the
coupling and pull out the tubing.
White collar
Bottom
IUHH]HU
hinge
3
CAUTION
Lifting Hazard.
Single person lift can cause injury. Use assistance
when handling, moving or lifting the refrigerator
doors.
NOTE: When moving door, to prevent damage to
door and electronics carefully place the door in a
proper location.
WARNING
To reduce the risk of electric shock
or injury during installation, you must first unplug the
UHIULJHUDWRUEHIRUHSURFHHGLQJ)DLOXUHWRIROORZWKHVH
instructions can result in electrical shock.
To Next Page
Loading...
Need help?
General
