GE 24116 - 4 - Device Universal Remote User Manual

11
Controlling Devices Requiring Separate Power On
and Off Buttons, cont.
To turn the TV off, press and release the ON-OFF
button to transmit the Power Off button command.
This method can be applied similarly to any device
and is available for all Modes. Note this feature is not
supported by all codes.
DVD/DVR Punch-Through Feature
This remote allows the 6 DVR transport buttons (i.e.,
PLAY, PAUSE, STOP, FF, REWIND, and REC) to Punch-
Through control from any Mode programmed with
TV, SAT or Cable codes to the last DVD, DVR or VCR
programmed Mode you used. Normally other types
of remotes only punch-through (from another Mode)
on the 6 DVR buttons to the device programmed
under the DVR Mode button. This is not much use
if you are using a DVD programmed under a Mode
other than DVR. For example, if you have 2 DVD, or
DVR devices programmed into this remote, the last
one you accessed on the remote will be the one that
has control of the 6 DVR transport buttons when in
any other Mode. This feature will not operate if the
programmed TV, SAT or Cable code has its own DVR
transport button control e.g., a TV Combo, SAT/PVR,
etc.
Volume/Mute Control and Punch-Through Feature
This remote lets you select which device Mode
controls your Volume/Mute buttons. The remote
is initially set (factory default) for all device Modes
programmed with “Visual” codes (e.g., TV, DVD, DVR,
SAT & CABLE) and “Audio” codes (e.g., CD & AUDIO)
to use their own Volume/Mute control if present. If
the programmed “Visual” code has no Volume/Mute
operation of its own then those buttons will punch-
through control to the TV Mode device without
needing to change to TV Mode. Please refer to the
next page for more information.
Setup, cont.

GE 24116 - 4 - Device Universal Remote Specifications

General

Brand	GE
Model	24116 - 4 - Device Universal Remote
Category	Remote Control
Language	English