8
Using Your Remote
Code Identification
The Code Identification Feature allows you to identify
the four digit library code stored under your device
button. For example, if you want to find out what
four digit code is stored under your TV device button,
follow the six steps below:
1. Press and hold the SETUP button until
the red indicator stays on. Release the
SETUP button.
2. Press and release the desired device
button (TV, DVR, etc.). The red
indicator blinks, then stays lit.
3. Press and release the SETUP button. The
red indicator blinks once and remains lit.
4. To find the first digit for
the code stored under
the device button
pressed in step 2, press
each numeric button
from 0-9 in turn. The
number that causes
the indicator light to
blink is the first digit in
your code.
5. To find the second digit, repeat step 4.
6. Repeat step 4 to find the third and fourth digit.
To Next Page
Loading...
Need help?
General
