GE 24991 User Manual

12
Using Your Remote, cont.
Setting any Mode to use its own
Volume/Mute Control
This routine can set any Mode to use only its own
Volume/Mute control. Note - If your chosen Mode
has no Volume/Mute functions of its own then the
Volume/Mute buttons will do nothing.
1. Press and hold the
SETUP button until
the red indicator turns on, then release
the button.
2. Press and hold the MUTE button until
the red indicator blinks off, then release
the button.
3. Press and release the desired Mode
button (TV, DVD, etc.), the red indicator
blinks then stays on.
4. Press and release the VOLUME- (Down)
button, the red indicator blinks then stays
on.
5. Press and release the MUTE button
and the red indicator turns off.
Your chosen Mode will now use its own
Volume/Mute control.

GE 24991 Specifications

General

Brand	GE
Model	24991
Category	Universal Remote
Language	English