16
Redial
You may redial the last number you called by pressing the
REDIAL/PAUSE button after you get a dial tone.
NOTE: The Redial feature holds in memory the
last phone number you dialed (as many as
32 digits). If you pressed any numbers after
dialing the phone number, (for example, when
accessing a voice-menu system) those numbers
also are redialed.
Memory
Store as many as 13 numbers in memory for easy dialing.
Three can be stored in the Emergency Quick Dial locations,
and ten additional numbers in the numbered keys (0-9).
Storing a Number in Memory
1. Make sure the telephone is properly installed. Pick up the
handset and listen for the dial tone. If you don’t hear the
dial tone, recheck or repeat the installation steps.
2. Press the SPEAKER button or pick up the handset.
3. Press the STORE button.
4. Dial the number to be stored (up to 16 digits)
5. Press the STORE button again.
6. Press a memory location (0-9 on the keypad), or an
Emergency Quick Dial button.
7. Press the SPEAKER button or hang up the handset.
To Next Page
Loading...
Need help?
General
