GE 29897GE1 User Manual

14
3. When nished, press ENTER to conrm. The unit beeps.
NOTE: To skip to the next setting, press MENU. To exit setup, press
EXIT.
Toll Saver
Toll Saver can save you the cost of a call when you access your messages from
another phone:
• If you have new messages, the unit answers after the 2nd ring.
• If you have no new messages, the unit answers after the 5th ring.
You can hang up after the 3rd ring and save the pay telephone or long distance charge.
Setting the Security Code
This feature allows you to change the factory default remote access code used for
remote access to you answerer. The default code is 123.
1. If you just adjusted the Rings to Answer menu, skip to step 2. If you haven’t
adjusted any other setting, press and release the MENU button until REMOTE
ACCESS is displayed.
2. Use NEXT or REVIEW to select the rst digit.
3. Once the rst digit is set, press ENTER. The unit beeps to conrm.
4. Repeat steps 2-3 until all the digits of the security code are set.
NOTE: To skip to the next setting, press MENU. To exit setup, press
EXIT.
TIP: You can use the keypad to enter all the digits in one step. To
enter 456, press 4, 5, and 6. Then press ENTER.
Setting the Dialing Mode
This adjustment allows you to select tone (touch-tone) or pulse (rotary) mode dialing.
The phone is automatically set for touch-tone use.

GE 29897GE1 Specifications

General

Brand	GE
Model	29897GE1
Category	Telephone
Language	English