EasyManuals Logo
Home>GE>Switch>45609

GE 45609 User Manual

GE 45609
13 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #11 background imageLoading...
Page #11 background image
11
Invert Switch
If the switch is accidentally installed upside down with “On” at the
bottom and “Off” at the top, the default On/Off rocker settings can
be reversed by changing parameter 4’s value to “1”.
Parameter No: 4
Length: 1 Byte
Valid Values = 0 or 1 (default 0)
Restoring Factory Defaults
All Configuration Parameters can all be restored to their factory
default settings by using your primary controller to delete/reset
the device.
Interoperability with Z-Wave
Devices
A Z-Wave™ network can integrate devices of various classes,
and these devices can be made by different manufacturers.
Although every Z-Wave certified product is designed to work with
all other Z-Wave certified products, your controller must include
the appropriate device classifications in order to control non-light-
ing Z-wave devices. As an example, the GE 45600 basic remote
is designed only for controlling Z-Wave devices using the lighting
control classification. The GE 45601 deluxe remote with LCD read-
out can control other Z-Wave certified devices like thermostats as
well as lighting.
WARRANTY
JASCO Products warrants this product to be free from manufac-
turing defects for a period of two years from the original date of
consumer purchase. This warranty is limited to the repair or replace-
ment of this product only and does not extend to consequential or
incidental damage to other products that may be used with this
product. This warranty is in lieu of all other warranties, expressed or
implied. Some states do not allow limitations on how long an implied
warranty lasts or permit the exclusion or limitation of incidental or
consequential damage, so the above limitations may not apply to
you. This warranty gives you specific rights, and you may also have
other rights which vary from state to state. Please contact Customer
Service at 800-654-8483 (option 4) between 7:30AM – 5:00PM CST
or via our website (www.jascoproducts.com) if the unit should prove
defective within the warranty period:
JASCO Products Company
Building B, 10 E Memorial Rd.
Oklahoma City, OK 73114

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the GE 45609 and is the answer not in the manual?

GE 45609 Specifications

Power IconPower
voltage120 VAC
frequency60 Hz
Signal IconSignal
signal frequency908.42 MHz
rangeUp to 100 feet
Capacity IconCapacity
maximum load (incandescent)600W
maximum load (motor)½ HP
maximum load (resistive)1800W
maximum load (amperage)15A
Operating Environment IconOperating Environment
operating temperature range32-104° F
operating temperature range (Celsius)0-40° C

Related product manuals