GE 94931 User Manual

8
Programming With Code Search
If your TV, VCR, DVD.CD player, satellite receiver,
or Cable Box does not respond after you have
tried all the codes for your brand, or if your
brand is not listed, try searching for your code
by following the steps below.
1. Turn on the device
you wish to program.
2. Press and hold SETUP
until the INDICATOR
LIGHT lights, then
release SETUP.
3. Press and release the
device button for the
device you are
programming. The
INDICATOR LIGHT
will blink once then
remain lit.
4. Press and release
ON•OFF until your
device turns off.
Important:You may
have to press ON•OFF
up to 200 times.
5. When your device
turns off, press the
ENTER button, the
INDICATOR LIGHT
will go off.
ON•OFF
INDICATOR
LIGHT
SETUP
VCR
TV
DVD•AUX
CBL•SAT
(BLINK)
OFF
ENTER
94930 Revised Size 1/22/02 4/15/04 5:19 PM Page 9

GE 94931 Specifications

General

Brand	GE
Model	94931
Category	Remote Control
Language	English