K0554 Revision A 7
If the self test fails, or for any other reason the test set is considered to be unserviceable,
contact GE and return the test set to the GE or GE approved service centre.
Test set status indications (4):
4a Power on and self test:
- Off (power Off)
- Standby (Yellow)
- Self test in progress (Green (flashing))
- Pass/Ready (Green)
- Fault (Red)
4b Battery pack status (if fitted):
- For LED indications, see User Manual K0553 section 5.4 “ADTS5xxF
battery pack”
4c
Bluetooth
® wireless technology connection status:
- Wireless connection present (Blue)
- Looking for wireless connection (Flashing blue)
- Wired connection present (Wireless off)
4d Aircraft status:
- When the ADTS is controlling the aircraft and it is “off ground”, the LED
will be Yellow
- When the ADTS is controlling the aircraft to “going to ground”, the LED
will flash yellow
- When the ADTS has made the aircraft “safe at ground”, the LED is green
- In standby-mode, this LED will be off.
To Next Page
Loading...
Need help?
General
