GE AEE09KP User Manual

62
Service Manual
Installation and Maintenance
Steps
Procedure
1
2
Remove cabinet
Loosen the clasp fixing chassis;remove
the screws fixing the rear part of cabinet
and then pull out the unit.
Remove panel assy
Open the air-inlet panel; remove the
filter; remove the screws in the middle,
at the left side and right side of the
panel; beat the clasp of cabinet slightly
and then remove the panel.
air-inlet panel
filter
screw
clasp fixing chassis
10. Removal Procedure
Warning Be sure to wait for a minimum of 10 minutes after
turning off all power supplies before disassembly.

GE AEE09KP Specifications

General

Type	Window Air Conditioner
Cooling Capacity	9000 BTU
Energy Efficiency Ratio (EER)	12.1
Voltage	115V
Weight	54 lbs
Air Flow (High)	200 CFM
Refrigerant	R32
Power Supply	115V