49-7778-2 13
INSTALLATION INSTRUCTIONS
Installation Instructions
4. INSTALL THE AIR CONDITIONER
IN THE WINDOW
A. Measure the width of the window opening and
mark the center line on the inside window sill.
For model AHD06:
Place the unit in the window. Lower the window
sash to hold unit in place.
B. Set the air conditioner in the window so that is
centered. Place the air conditioner so that front
edge of the bottom mounting rail is against the
back edge of the sill.
Make sure that the air conditioner is level or tilting
slightly to the outside.
Width of window opening
Center line
4. INSTALL THE AIR CONDITIONER
IN THE WINDOW (continues)
C. Install the side bracket into the unit and into the
window sill using two 1” wood screws provided.
Repeat on other side.
D. Extend the curtain panels until they fill the
window.
Mark the location of the holes in each corner of
WKHFXUWDLQ8VHWKHGULOODQG´GULOOELWWRGULOO
SLORWKROHV8VHW\SH%VFUHZVWRVHFXUHWKH
side panels in place.
Top Rail
Lower
Window Sash
Sill
Bottom Rail
Cut and apply weather
strip to front and
bottom edge of window
frame.
Cut and apply weather
strip to back edge of
the window sill
To Next Page
Loading...
Need help?
General
