GE Beaumark 25 User Manual

BEFORE YOU BEGIN
Read these instructions completely
and carefully.
•
IMPORTANT — Save these
instructions for local inspector’s use.
•
IMPORTANT — Observe all
governing codes and ordinances.
• Note to Installer – Be sure to leave these
instructions with the Consumer.
• Note to Consumer – Keep these
instructions for future reference.
• Skill level – Installation of this appliance
requires basic mechanical skills.
• Completion time – Refrigerator Installation
30
minutes
Water Line Installation
30
minutes
• Proper installation is the responsibility of
the installer.
• Product failure due to improper installation
is not covered under the Warranty.
If
the refrigerator has already been installed,
remove
the base grille (see Step 2 in Moving
the Refrigerator), then skip to Step 5 in
Installing the Refrigerator.
Questions? Call 1.800.361.3400.
Installation Refrigerator
Instructions
Models 23 & 25
If the refrigerator has an icemaker, it will have
to
be connected to a cold water line. A GE
water supply kit (containing tubing, shutoff
valve, fittings and instructions) is available
at extra cost from your dealer, or from Parts
and Accessories, 1.800.661.1616.
PREPARATION
WATER SUPPLY TO THE ICEMAKER
TOOL
S YOU WILL NEED
17
Phillips Head Screwdriver
3/8″ and 5/16″ Socket 1/2″ and 7/16″ Wrench
Plastic Putty Knife

GE Beaumark 25 Specifications

General

Brand	GE
Model	Beaumark 25
Category	Refrigerator
Language	English