GE BiliSoft 2.0 User Manual

1-4
BiliSoft 2.0 Light Pad Assembly
The fiberoptic light pad comes in two sizes, small and large. The small pad surface is 8x10 inches.
The large pad surface is 10x12 inches.
The LED light source in the BiliSoft 2.0 light box is focused on the fiberoptic lens at the end of the
Light Pad connector. The fiberoptic cable contains plastic fibers that transmit light from the light box
to the light pad. The light pad is constructed of these plastic fibers woven into a mat. This patented
process produces a light pad that emits light over its entire surface. The average light intensity
depends on the size of the light pad. See Chapters 7 and 8 for detailed specifications.
Component/Control
1. Light pad
2. Pad connector
3. Fiberoptic lens
4. Fiberoptic cable
Warning:
Do not place a baby directly on the bare fiberoptic light pad. The fiberoptic
light pad should always be covered with a BiliSoft Pad Cover or Nest when
used.
3
2
4
1

GE BiliSoft 2.0 Specifications

General

Brand	GE
Model	BiliSoft 2.0
Category	Personal Care Products
Language	English