GE BiliSoft 2.0 User Manual

7-2
Performance Specifications
Spectral Irradiance when
shipped (bare fiberoptic pad)
Using an Ohmeda Medical
BiliBlanket Meter II
Large Pad – 49 µW•cm
-2
•nm
-1
(+/- 25%) 9-point check
Small Pad – 70 µW•cm
-2
•nm
-1
(+/- 25%) 6-point check
Note: When the BiliSoft 2.0 fiberoptic light pad is inserted
into a BiliSoft Pad Cover or BiliSoft Nest, the average
spectral irradiance is 35 µW•cm
-2
•nm
-1
(large pad) and 50
µW•cm
-2
•nm
-1
(small pad)
Peak Wavelength
445-470 nm
LED module estimated life
1
Under continuous use, at room temperature, a typical LED
module will run over 50,000 hours before the light intensity
drops 25% below minimum the rated output.
Sound level
< 44 dB(A) at 1 meter
X-ray
Light Pad is X-ray compatible
Physical Specifications
Light box (W x H x L)
16.5 x 21 x 17.5 cm
Light box weight (excluding
fiberoptic pad)
< 1.7 kg
Light Pad weight
< .5 kg (large or small)
Light Pad, size small
20 x 25 cm (light-emitting area)
Light pad, large
25 x 30 cm (light-emitting area)
Light Pad cable length
137 ± 5 cm
Product Life Span
Service Life
The Light Box is designed to meet a life span of 7 years.
The Light Pad is designed for a life of 3.5 years. However,
with proper maintenance and repairs, the service life can
be extended as longs as service parts are available.
Regulatory Standards
IEC 60601-1; IEC 60601-1-11; IEC 60601-2-50; IEC 60601-1-2; IEC 60601-1-6
ISO 10993-5; ISO 10993-10;
AAMI ES60601-1, CSA C22.2 No. 60601;
16CFR Part 1632.6 (for disposable pad covers)
Note 1: The LED module life may vary when used in the actual clinical environment. Factors such as
duty cycle and ambient temperature may impact the life of the LED module.

GE BiliSoft 2.0 Specifications

General

Brand	GE
Model	BiliSoft 2.0
Category	Personal Care Products
Language	English