Concord/Express
quick reference guide
1. Set your alarm when leaving home (motion detectors ON):
a. Close doors and windows until no zones show open.
b. Press AWAY (3) + User Code.
c. Red “ARMED” light will turn on. Exit the premises within 60 seconds.
2. Disarm the system (or cancel an accidental alarm):
a. Keypad will beep. You have 30 seconds to disarm.
b. Press OFF (1) + User Code.
3. Set the alarm when at home with a delay (motion detectors OFF):
a. Close doors and windows until no zones show open.
b. Press STAY (2) + User Code.
c. Red “ARMED” light will turn on.
4. Disarm before opening doors:
a. Press OFF (1) + User Code.
5. Set the alarm when at home with no delay (motion detectors OFF):
a. Close doors and windows until no zones show open.
b. Press STAY (2) + User Code + Press NO DELAY (4) button.
c. Red “ARMED” light will turn on.
6. If an alarm has been triggered:
a. Before proceeding, verify that the alarm was triggered accidentally. If you
aren’t sure, wait for the phone call from central station.
b. If accidental, press OFF (1) + User Code. This will silence the alarm and cancel
dispatch.
Continued on Back
To Next Page
Need help?
General
