Installation Instructions
29
INSTALLATION PREPARATION
Remove the packaging.
Flatten the product carton to use as a pad to lay
the dryer down on its side. Continue using the
carton to protect the finished floor in front of
the installation location.
KIT CONTENTS (GE KIT #GE24STACK)
TOOLS YOU WILL NEED
❒ Phillips screwdriver
❒ Level
❒ Gloves
INSTALLING THE STACK
BRACKET KIT
REMOVE THE DRYER LEVELING LEGS
A. Carefully lay the dryer on its side. Use the
packing material so you don’t scratch the finish
on the dryer.
1
B. Remove the dryer leveling legs.
Unscrew and remove
all 4 leveling legs
INSTALL RUBBER PADS
TO DRYER BASE
A. Locate the 4 rubber pads in the parts package.
Insert rubber pads into the leveling leg holes.
B. Set the dryer upright.
2
Screws (4)
Rubber
pads (4)
Bracket-
stack (R)
Bracket-
stack (L)
To Next Page
Loading...
Need help?
General
