GE Dryers User Manual

TOOLS YOU WILL NEED
REVERSING THE DOOR SWING
12
IMPORTANT NOTES
•
Read the instructions all the way through
before starting.
•
Handle parts carefully to avoid scratching
paint.
• Set screws down by their related parts to
avoid using them in the wrong places.
• Provide a non-scratching work surface for
the doors.
• Normal completion time to reverse the door
swing is 30–60 minutes.
IMPORTANT: Once you begin, do not move
the cabinet until door-swing reversal is
completed.
These instructions are for changing the
hinges from the right side to the left side—
if you ever want to switch them back to the
right side, follow these same instructions and
reverse all references to the left and right.
BEFORE YOU START
Unplug the dryer from its electrical outlet.
1
Phillips Head
Screwdriver
Putty Knife or Thin-
Blade Screwdriver
Hinge
Assembly
Hinge
Cover
Window
Retainer
Large Tapping
Screw (#10) – 6
Tapping
Screw (#8) – 2
Machine
Screw (#8) – 6
REMOVE DOOR ASSEMBLY
Open the door to approximately 90 degrees.
Remove the 4 screws starting from the
bottom to the top. Make sure the door is
supported while removing the screws.
Loosen the top screw as shown. Unhook the
door by lifting and pulling as shown by the
arrows.
2
Remove the
four screws.
DOOR PARTS

GE Dryers Specifications

General

Brand	GE
Model	Dryers
Category	Dryer
Language	English