Consumer SupportTroubleshooting Tips
Operating Instructions
Safety Instructions Installation Instructions
About the dryer control panel (models DSKS333E and DSKP333E). ge.com
Automatic cycles automatically determine fabric dryness. Select EXTRA DRY for heavier fabrics or to make regular
fabrics drier. Timed cycles run for a selected time.
Drying Cycles
AUTOMATIC CYCLE For cottons and most linens. For most loads select the Preferred Regular Setting marked
REGULAR HEAT
∗
OPTIMUM.
FLUFF CYCLE For freshening or fluffing already dry clothing, fabric, linen and pillows.
NO HEAT Provides no-heat tumbling for the selected time.
TIMED CYCLE Set the Cycle Selector at the desired drying time.
HIGH HEAT
Start
—Close the dryer door. Push the START button to start the dryer. Opening the door during operation will stop
the dryer. To restart the dryer, close the door and select START to complete the cycle.
NOTE: Drying times will vary according to size of load, types of fabrics, wetness of clothes and
condition of exhaust ducts. If clothes are still damp after using the Preferred Regular Setting, select
Extra Dry on future similar loads.
2
1
Model DSKS333E
1
You can locate your model number on the label on the front of the dryer behind the door. Throughout this manual,
features and appearance may vary from your model.
About the control settings. NOTE: Not all features are available on all dryer models.
IMPORTANT: Clean the lint filter each time you use the dryer.
2
Model DSKP333E
1
2
5
To Next Page
Loading...
Need help?
General
