Customer ServiceTroubleshooting Tips
Operating Instructions
Safety Instructions
Installation Instructions
About the operation of your freezer.
Starting the Freezer
Clean the inside of the freezer with a mild solution of baking soda and water
(see
Care and Cleaning
).
If the lid was removed, make sure all wires are reconnected.
Connect cord to power outlet.
Set the temperature monitor (on some models) to “ ” (off).
Move the temperature control to
4.
This is the normal setting for safe, long-term
freezing. For colder temperatures turn to a higher number.
Allow freezer to operate for at least two hours before placing food inside.
Set the temperature monitor (on some models) to “
11
” (on).
7
6
5
4
3
2
1
5
Temperature Monitor
(on some models)
An alarm sounds if the temperature in the
freezer rises 12°F. (-11°C.) or is higher than
normal for the selected setting. The alarm,
on the lower right side of the freezer next to
the temperature control, is controlled by a
3-position switch.
“ ” prevents the alarm from sounding
when the freezer is warm (during cool-
down, when defrosting, or during initial
start-up).
“
√
” causes the alarm to sound regardless
of temperature. Test the alarm system
regularly—at least once a month.
“
11
” is the setting for normal freezer use. Be
sure to return the switch to “
11
” when the
freezer has cooled down after defrosting.
The alarm may sound if the temperature
control is turned to a much colder setting,
as from
2
to
5.
It may also sound if a large
amount of unfrozen food is added at one
time, causing the freezer temperature to rise.
Temperature Control
Freezing temperature selection is made by
setting the control from
1
to
7
(coldest).
Normal safe freezing level is obtained by
setting the control at
4.
Turning the temperature control all the way
to the left or past
0
until it clicks stops the
cooling process but does not shut off power
to the freezer.
Some models have a preset temperature and
no control knob.
To Next Page
Loading...
Need help?
General
