64
FW Version (Firmware Version)
Use this setting to view the current camera rmware version.
1. Select the
FW Version setting from the Setup menu as
described previously.
2. If SD card contains a new version of rmware, please
upgrade accordingly as necessary.
To update to the latest rmware version, you can
go to the following website: http://www.ge.com/
digitalcameras.
Reset Settings
Use this setting to restore the camera to its default settings.
1. Select the
Reset setting from the Setup menu as
described previously.
2. Use the
Up/Down navigation buttons to select Yes or No.
Then press the button to conrm.
To Next Page
Loading...
Need help?
General
