51
50
Cleaning and Disinfecting Procedures
Error Messages and Troubleshooting
Temperature Error
1. In order to get accurate testing results, please test between 6-44°C (43-111°F).
2. When the temperature is below 6°C (43°F) or over 44 °C (111 °F), the meter will not function
and the " " symbol will blink.
3. If the GE200 Blood Glucose Meter and Test Strips are exposed to a substantial change in
temperature, please wait 30 minutes before measurement.
CAUTION
- Users should wash their hands thoroughly with soap and water after handling the meter, lancing device or
test strips.
- Please examine your LCD screen, test strip port, buttons and surface of your meter and lancing device
after cleaning and disinfecting cycles. Stop using the meter and/or lancing device if any of the following
occur:
- Thin, sliver streaks appear on the screen,
- The screen becomes cracked, soft, dissolved, brittle or swollen.
- You are unable to turn on/off your meter, operate the right / left button, the lancing device
release button or depth adjustable cap.
- You are unable to enter meter settings, function modes or recall your testing results.
If you have any questions or concerns, please contact your GE200 Blood Glucose Monitoring System
authorized representative or call the toll free
at .
Auto Control Medical Distribution and Customer Service Center
1-800 964-8434
To Next Page
Loading...
Need help?
General
