Installation Instructions.
Feed Water Adapter and Supply Valve
A. PREFERRED INSTALLATION
(Utilizing existing kitchen sink water supply valve [A] and removable faucet tubing [B])
For 1/2-inch and 3/8-inch installations
1. Refer to Fig. 1 to complete assembly depending on supply valve size (A).
2. Turn off the COLD water supply valve (A).
3.
Unscrew the existing faucet tubing line (B) from the supply valve (A), COLD side only. NOTE: For rigid pipe, see C. Optional Installation
on page 7.
6
(B) Faucet tubing
line (not included)
(D) Coupling
(C) Adapter
(A) Water supply
valve (not included)
(F) Inlet valve
(G) Gasket
(H) Ferrule
(I) Nut
(F) Inlet valve
Fig. 2
Fig. 1
For 3/8-inch Valve For 1/2-inch Valve
(C) Adapter
(G) Gasket
(F) Inlet valve
(D) Coupling
(B) Faucet tubing
line (not included)
(A) Water supply
valve (not included)
To Next Page
Loading...
Need help?
General
