HOW TO CHANGE COLOR PANELS
If
you
are redecorating, you
can
change
your dishwasher’s
front
panel to
match
or blend with your new
colors
by flipping it over. Each side of each
panel is
a
different color. You may also paint
a
panel with a color of your
own choice.
How to Change the Door Panel:
1.
Take out trim screws on either side
of
the
dishwasher door. Remove the side trim.
2.
Slide
the door panel out.
(Careful—edges
may
be sharp.)
3. Turn the door panel around
and
put the color you
want in front.
4. Replace the door panel, side trim
and
screws.
Wood
panel
Trim Kits
(Available for both models)
Wood panel trim kits, contain trim and
instructions
for adding a decorative wood door
panel
and
lower access panel no thicker than 1/4”
to match kitchen cabinets.
Specify the trim color of your choice from the
following options:
GPF40BC (Chrome Trim and Screws)
GPF40BK (Black Trim)
GPF40WH (White Trim)
The kit is available for $5.00 (shipping and handling).
Make check payable to the General Electric Co.
NOTE: Do not operate
dishwasher while changing
panels or when lower access
panel is removed.
COIOr
panels
(For model
GSD500
only)
If you have redecorated, and the color panels in
your dishwasher do not blend with your new
color
scheme you may order one additional color
panel
without char&e.
Specify the color panel you would like from the
following options:
GPF24 White/Almond
GPF26
HarvestiBlack
Order a Trim Kit or a Color Panel from:
GE Appliances
c/o
Dri-View
Manufacturing
4706
Allmond
Ave.
Louisville. KY 40209
12
To Next Page
Loading...
Need help?
General
