Safety InformationOperating InstructionsTroubleshooting TipsCustomer Service
Changing color panels.
16
If you are redecorating, you can change your dishwasher’s front
panel to match or blend with your new colors by flipping it over.
Each side of each panel is a different color. You may also paint a
panel with a color of your own choice.
WARNING!
■
Wear gloves when handling door panels. Failure to do so can
cause serious cuts.
■
Do not operate dishwasher while changing panels.
Changing the Door Panel
Take out trim screws on either side of the
dishwasher door. Remove the side trim.
Slide the door panel out. (Careful—edges may
be sharp.)
Turn the door panel around and put the color you
want in front.
Replace the door panel, side trim and screws.
NOTE:
Do not operate dishwasher while changing panels
or when bottom panel is removed.
4
3
2
1
Changing the Bottom Panel
Remove the bottom panel attachment screws.
Remove the top mounting screws.
Take out the top trim screws and remove the top
trim.
Slide the color panel(s) up and out and put the
color you want in front.
Replace the top trim and screws.
Replace the entire assembly by reversing the steps.
6
5
4
3
2
1
Top
Mounting
Screw
Top
Trim
Bottom Panel Attachment Screws
To Next Page
Loading...
Need help?
General
