16
Installation Instructions
ICEMAKER INSTALLATION INSTRUCTIONS
Flat blade and Phillips
screwdrivers
Pliers
TOOLS YOU WILL NEED
Sharp knife
Remove
plug
PREPARE FOR INSTALLATION
• Remove and discard the large white plug from the
rear freezer wall.
• Remove the outlet cover with a flat-blade screwdriver.
1
BEFORE YOU BEGIN
Read each step thoroughly before proceeding.
WARNING
To eliminate the risk of
electric shock or injury during installation,
you must first unplug the refrigerator
before proceeding. Failure to follow these
instructions can result in electrical shock.
REPOSITION FREEZER SHELF
Make sure the freezer shelf is in the lowest position.
2
PREPARE FOR INSTALLATION
There is a lebel on the back of the refrigerator that
will tell you which fill tube to use. Follow the icemaker
installation manual that comes with yuor icemaker kit
carefully to complet the icemaker installation.
3
To Next Page
Loading...
Need help?
General
