GE GX1S01R User Manual

INSTALLATION OPTIONS
CAUTION:
For connection to cold water line only.
Option 1: For connection to primary sink faucet
NOTE: For use with filter element FXUTC ONLY.
Use of other filter elements could adversely affect
main faucet flow rate.
1. Shut off cold water supply.
2. Cut out a section of pipe.
3. Make connections as shown.
4. Fully open the cold water faucet.
5. Slowly turn on the cold water supply valve
and check for leaks.
6. Allow cold water to run until air is removed
from water.
Option 2: For connection to secondary filtered
water faucet
NOTE: For use with FXUTC or FXULC (rev. 2)
filter elements.
■ See Required Parts for Installation on page 1.
■ Faucet – UCFCTBL or UCFCTWW
■ Sump Wrench – UCWRNCH
1. Shut off cold water supply.
2. Make connections as shown.
3. Fully open cold water faucet.
4. Slowly turn on cold water supply valve
and check for leaks.
5. Allow cold water to run until air is removed
from water.
NOTE: Sump wrench (UCWRNCH) and faucet (UNFCTBL)
are sold separately for model GX1S01R.
Mounting bracket to wall
The bracket can be used as a template for marking
the location of the mounting screws. When determining
the location of the bracket make sure you leave 1
1
⁄2″
to 2″ of free area under the sump to allow for sump
removal and enough space on either side to make
the tubing connections.
NOTE: Predrill 1/4″ holes in wall for easy installation.
Filtered
water faucet
Sink
Hot
Cold
Water Supply
Saddle Valve
Washer
Adapter
Nut
Water in
Water out
Tubing
Insert
Mounting
screw (2)
Nut
Tubing
Mounting
screws
Mounting
bracket
Sump
2
3
/4″
1
1
⁄2 ″ to 2″
Cold water line
Water supply
valve
Inlet
Outlet
2
To main faucet

GE GX1S01R Specifications

General

Brand	GE
Model	GX1S01R
Category	Water Filtration Systems
Language	English