The Minute/Second Timer Using a Holding Time
The Minute/Second Timer has three timing
The Minute/Second Timer can also be used to
functions:
program a “holding time” between microwave
●
It operates as a minute timer.
coo-tin:
functions.-The
time can range from one
second to 99 minutes and 99 seconds. A holding
●
It can be set to delay cooking.
or standing time may be found in some of your
●
It
can be used as a hold setting after defrosting.
own recipes or in the Cooking Guide.
The Minute/Second Timer operates without
microwave energy.
How to Time a 3-Minute Phone Call
Programming Delayed Cooking
Step 1:
Touch MIN/SEC TIMER pad.
To delay cooking up to 99 minutes and 99 seconds,
Step
2:
Touch number pads 3,0 and O for 3 minutes.
touch TIME COOK pad and enter desired cooking
Step
3: Touch START. Display shows time
time. Touch MIN/SEC TIMER and enter number of
counting down.
minutes to delay cooking. Then touch START. Timer
will count down to zero and cooking will begin.
Step
4:
When time is up, oven signals and display
shows time of day.
How to Defrost, Hold and Time Cook
Let’s say you
wmt
to defrost a frozen casserole for
15 minutes, hold for 10 minutes and then Time Cook
for 25 minutes. Here’s how to do it:
Step 1:
Take casserole from freezer and place in oven
n
Step 3: Touch pads 1,5,0 and
1
0
for 15 minutes defrosting time.
(Defrosting is automatically set on
power
level
3, but can be changed
by touching the POWER LEVEL
pad and the desired power level.)
Step
4: Set standing or hold
_
TIMERpad
time by touching MIN/SEC
Step 5:
Touch 1,0,0 and O to hold for ten minutes.
Step
7: Touch 2,5,0 and O for 25 minutes of
cooking time.
Step 8:
Touch START.
m
;i${;!;:i!;med
instructions entered and
tie
function. While cooking,
you may touch appropriate
pad to recall times you set.
Step 9:
When time is up, the oven signals and
flashes “End.”
9
To Next Page
Loading...
Need help?
General
