EasyManuals Logo
Home>GE>Ranges>JGB735

GE JGB735 User Manual

GE JGB735
36 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #28 background imageLoading...
Page #28 background image
28 49-2000782 Rev. 3
Oven Door
For Model PGB355
The door is very heavy. Be careful when removing and lifting the door. Do not lift door by the handle.
To Remove the Door:
1. Fullyopenthedoor.
2. Pullthehingelocksupandawayfromtherange
frame to the unlocked position.
3. Firmly grasp both sides of the door near the top.
4. Close door until the top of the door is approximately
6” from the range frame.
5. Lift door up and away from the range until both hinge
arms are clear of the slots in the range frame.
To Replace the Door:
1. Firmlygraspbothsidesofthedoornearthetop.
2. With the door at the same angle as the removal
position, rest the notch on the underside of the left
hinge arm on the bottom edge of the left hinge slot.
The notch in the hinge arm must be fully seated into
the bottom of the slot. Repeat for the right side.
3. Fully open the door. If the door will not fully open, the
notches in the bottoms of the hinge arms have not
seated correctly in the bottom edge of the slot. Lift the
door off the range and repeat previous step.
4. Pushthehingelockstowardtherangecavityand
down to the locked position.
5. Close the oven door.
For Models JGB660 and 735
The door is very heavy. Be careful when removing and lifting the door. Do not lift door by the handle.
To Remove the Door:
1. Fullyopenthedoor.
2. Pullthehingelocksupandawayfromtherange
frame to the unlocked position.
3. Firmly grasp both sides of the door near the top.
4. Close door until the top of the door is approximately
6” from the range frame.
5. Lift door up and away from the range until both hinge
arms are clear of the slots in the range frame.
To Replace the Door:
1. Firmlygraspbothsidesofthedoornearthetop.
2. With the door at the same angle as the removal
position, rest the notch on the underside of the left
hinge arm on the bottom edge of the left hinge slot.
The notch in the hinge arm must be fully seated into
the bottom of the slot. Repeat for the right side.
3. Fully open the door. If the door will not fully open, the
notches in the bottoms of the hinge arms have not
seated correctly in the bottom edge of the slot. Lift the
door off the range and repeat previous step.
4. Pushthehingelockstowardtherangecavityand
down to the locked position.
5. Close the oven door.
Removal position
Pullhingelocksuptounlock
PushhingelocksdowntolockRest notch on bottom edge
of hinge slot
Notch
Bottom
edge of
slot
Hinge arm
CARE AND CLEANING: Oven Door
Pullhingelocksuptounlock
Notch
Pushhingelocksdowntolock
Removal position

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the GE JGB735 and is the answer not in the manual?

GE JGB735 Specifications

General IconGeneral
BrandGE
ModelJGB735
CategoryRanges
LanguageEnglish

Related product manuals