Installation Instructions
DIMENSIONS AND CLEARANCES
Provide adequate clearances between the range and adjacent combustible surfaces. These dimensions must be met for safe
use of your range. The location of the electrical outlet and pipe opening (see Gas Pipe and Electric Outlet Locations) may be
adjusted to meet specific requirements.
The range may be placed with 0" clearance (flush) at the back wall.
Minimum I
to cabinets
on either
side of the
range 30"
30"
18"
_1_ ]. 'a To wall on either s
Minimum
-r
standard burner n
2 'a To wall on either s
sealed burner no, Jels
II
(Minimum)
Maximum
depth for
cabinets above
countertops
O'a(Minimum)
To cabinets
below cooktop
and at the
range back
For models: JGB3000, JGB3001, JGB281, JGB300, JGB400
Q Minimum
18 '_ clearance
to right wall
Minimum
to cabinets
on either
side of the
3O"
/
range __
30"
Minimu3m'_r _- Minimum
clearance
toleft wail
(Minimum)
Maximum
depth for
cabinetsabove
countertops
_-- 0" (Minimum)
Tocabinets below
cooktop and at
the range back
35
To Next Page
Loading...
Need help?
General
