EasyManuals Logo
Home>GE>Cooktop>JGP628

GE JGP628 User Manual

GE JGP628
40 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #14 background imageLoading...
Page #14 background image
Beforeyoucall forservice...
Troubleshooting Tips
Save time and money! Review the charts on these pages first
and you may not need to carl for service,
Possible Causes What To Do
Burners have yellow or The combustion quality of
yellow4ippedflames burner flames needs to be
determined visually.
Use the illustrations below to dete_nine if your burner
flames are no,_na/. If burner flames look like A, ca/1for
service. Normal burner flames shoukt look like B or C,
depending on the type of gas you use. With i,P gas, some
yellow tipping on oumr cones is normal.
A-Yellow flames B-Yeflow tips C-Soft blueflames
Callfor service onouter cones Normal for natural
Normalfor LPgas gas
Control knobs Knob isn't pushed down. * To turn flom the OFF position, push the knob down
wilt not turn and then turn.
Burnersdo Plug on cooktop is not * Make sure electfi(a/plug is plugged into a live, properly
netlight completely inserted in the gqounded oudet.
dectrical outlet.
Gas supply not connected See the Installation Instructions that came with your
or turned on. cooktop.
A fuse in your home may be Replace tlle fi_seor reset tlle ci_vuit breaker
blown or the circuit breaker
tripped.
Burner parts not replaced See the Careand cleaning of thecooktop secdon.
correctly.
The electrodes under the * See the Careandcleaning of the cooktop section.
burners are soiled.
The white ceramic electrodes See the Care and cleaning of the cooktop section.
are not securely seated under
the burners.
Cooktop is locked. Unlock tile cooktop. See tlle Using the cooktop
burnerssection.
The igniter hole (on some See the Care andcleaning of the cooktopsecdon.
models) is plugged.
tickingsound ofspark
igniterpersistsafter
burnerlights
Control knob is still
in the LITE position.
Burner flames very Improper air to gas ratio.
large oryellow
* Turn the knob out of the UTEposition to the desired
setting.
* Turn the burner off and relight. If ticking is still
present, call for service.
* If cooktop is connected to LP gas, check all steps
in the Installation Instructions that came with
your cooktop.
/4

Other manuals for GE JGP628

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the GE JGP628 and is the answer not in the manual?

GE JGP628 Specifications

General IconGeneral
BrandGE
ModelJGP628
CategoryCooktop
LanguageEnglish

Related product manuals