EasyManuals Logo
Home>GE>Ranges>JS645SL3SS

GE JS645SL3SS User Manual

GE JS645SL3SS
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #19 background imageLoading...
Page #19 background image
49-80804 19
CARE AND CLEANING: Cleaning the Glass Cooktop
Normal Daily Use Cleaning
ONLY use CERAMA BRYTE
®
Ceramic Cooktop
Cleaner on the glass cooktop. Other creams may not
be as effective.
To maintain and protect the surface of your glass cooktop,
follow these steps:
1. Before using the cooktop for the first time, clean it
with CERAMA BRYTE
®
Ceramic Cooktop Cleaner.
This helps protect the top and makes cleanup easier.
2. DailyuseofCERAMABRYTE
®
Ceramic Cooktop
Cleaner will help keep the cooktop looking new.
3. Shake the cleaning cream well. Apply a few drops of
CERAMA BRYTE
®
Ceramic Cooktop Cleaner directly
to the cooktop.
4. Useapapertowelor
CERAMA BRYTE
®
Cleaning
Pad for Ceramic Cooktops
to clean the entire cooktop
surface.
5. Useadryclothorpaper
towel to remove all cleaning
residue. No need to rinse.
6. DonotuseCeramabryteon
any metal parts located next
to the glass.
NOTE: It is very important that
youDONOTheatthecooktopuntilithasbeencleaned
thoroughly.
Burned-On Residue
NOTE:DAMAGEtoyourglasssurfacemayoccurifyou
use scrub pads other than those recommended.
1. Allow the cooktop to cool.
2. Spread a few drops of CERAMA BRYTE
®
Ceramic
Cooktop Cleaner on the entire burned residue area.
3. UsingtheincludedCERAMABRYTE
®
Cleaning Pad
for Ceramic Cooktops, rub the residue area, applying
pressure as needed.
4. If any residue remains, repeat the steps listed above
as needed.
5. For additional protection, after all residue has been
removed, polish the entire surface with CERAMA
BRYTE
®
Ceramic Cooktop Cleaner and a paper towel.
Heavy, Burned-On Residue
1. Allow the cooktop to cool.
2. Useasingle-edgerazorbladescraperatapproximately
a 45° angle against the glass surface and scrape the
soil. It will be necessary to apply pressure to the razor
scraper in order to remove the residue.
3. After scraping with the razor scraper, spread a few drops
of CERAMA BRYTE
®
Ceramic Cooktop Cleaner on the
entireburnedresiduearea.UsetheCERAMABRYTE
®
Cleaning Pad to remove any remaining residue.
4. For additional protection, after all residue has been
removed, polish the entire surface with CERAMA
BRYTE
®
Ceramic Cooktop Cleaner and a paper towel.
Clean your cooktop after each
spill.UseCERAMABRYTE
®
Ceramic Cooktop Cleaner.
The CERAMA BRYTE
®
Ceramic Cooktop Scraper and all
recommended supplies are available through our Parts Center.
Seeinstructionsunder“Assistance/Accessories”section.
NOTE:Donotuseadullornickedblade.
Cleaning the Glass Cooktop
UseaCERAMABRYTE
®
Cleaning
Pad for Ceramic Cooktops.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the GE JS645SL3SS and is the answer not in the manual?

GE JS645SL3SS Specifications

General IconGeneral
BrandGE
ModelJS645SL3SS
CategoryRanges
LanguageEnglish

Related product manuals