EasyManuals Logo
Home>GE>Ranges>JSP26

GE JSP26 User Manual

GE JSP26
44 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #32 background imageLoading...
Page #32 background image
32
OPERATING THE SELF-CLEANING OVEN
Normal Cleaning Time: 4 hours
Before a Clean Cycle
We recommend venting with an open window or
using a ventilation fan or hood during the first self-
cleaning cycle.
1. Remove the broiler pan, broiler grid, all cookware
and any aluminum foil from the oven—they can’t
withstand the high cleaning temperatures.
NOTE: The oven shelves may be cleaned in
the self-cleaning oven. However, they will darken,
lose their luster and become hard to slide. Wipe the
shelf supports with cooking oil after self-cleaning
to make shelves slide more easily.
2. Wipe up heavy soil on the oven bottom. If you
use soap, rinse thoroughly before self-cleaning
to prevent staining.
3. Clean spatters or soil on the oven front frame and
the oven door outside the gasket with a dampened
cloth. The oven front frame and the oven door
outside the gasket do not get cleaned by the self-
clean cycle. On these areas, use detergent and hot
water or a soap-filled steel wool pad. Rinse well
with a vinegar and water solution. This will help
prevent a brown residue from forming when the
oven is heated. Buff these areas with a dry cloth.
Do not clean the gasket.
Clean the top, sides and outside front of the oven
door with soap and water. Do not use abrasives or
oven cleaners.
Make sure the oven light bulb cover is in place.
Do not rub or clean the door gasket—
the fiberglass material of the gasket has an
extremely low resistance to abrasion. An intact
and well-fitting oven door gasket is essential for
energy-efficient oven operation and good baking
results. If you notice the gasket becoming worn,
frayed or damaged in any way or if it has become
displaced on the door, you should have it replaced.
Do not let water run down through openings in
the top of the door. To help prevent water from
getting in these slots when cleaning, open the door
as far as it will go.
4. Close the oven door and make sure the oven light
is off. If the oven light is not turned off, the life
of the bulb will be shortened or it may burn out
immediately. The door latches automatically after
the clean cycle is set.
Do not use commercial oven cleaners or oven
protectors in or near the self-cleaning oven.
A combination of any of these products plus the
high clean-cycle temperature may damage the
porcelain finish of the oven.
Important
The oven door must be closed and all controls must
be set correctly for the cycle to work properly.
Area
inside
gasket
Oven
front
frame
Oven
light
Openings
in door
Oven door
gasket
Area
outside
gasket

Other manuals for GE JSP26

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the GE JSP26 and is the answer not in the manual?

GE JSP26 Specifications

General IconGeneral
BrandGE
ModelJSP26
CategoryRanges
LanguageEnglish

Related product manuals