GE Learn Mode Shock Sensor User Manual

4
PRELIMINARY 10/1/03
Battery Replacement
When the system indicates that the sensor has a low bat-
tery, remove the old battery and install a new battery (Dura-
cell DL123A or a Sanyo CR123A) into the battery holder,
observing proper polarity.
Caution!
Replace only with a Duracell DL123A battery or a Sanyo
CR123A battery. Observe polarity when installing a new
battery. Installing the battery backwards may cause damage
to the sensor.
Dispose of used batteries according to the manufacturer’s
instructions and/or local government authorities.
Specifications
Model No.: 60-975-95R and 60-975-11-95R
RF Frequency: 319.5 MHz
Compatibility: All GE Interlogix 319.5 MHz Control Panels and
Receivers
Battery Type: 3.0 VDC Lithium
Recommended Battery: GE CR123A
Typical Standby Current (µA): 10
Estimated Battery Life: 5 years (one battery); 10 years (two
batteries)
Typical RF Power Output (mW): 10
Operating Temperature Range (C°): 0 to 49
Storage Temperature Range (C°): -34 to 60
Relative Humidity: 0 - 90% non-condensing
Dimensions (mm): 45 x 115 x 31 (L x W x D)
Weight: 88
6HFRQG6WUHHW1RUWK
1RUWK6DLQW3DXO01
7HFKQLFDO6XSSRUW
)
*(,QWHUORJL[
*(,QWHUORJL[6LPRQLVDUHJLVWHUHGWUDGHPDUNRI*(,QWHUORJL[
$OORWKHUWUDGHPDUNVDUHSURSHUWLHVRIWKHLURZQHUV
$OOULJKWVUHVHUYHG

GE Learn Mode Shock Sensor Specifications

Power

RF frequency	319.5 MHz
battery type	3.0 VDC Lithium
typical standby current	10 µA

Battery

recommended battery	GE CR123A
estimated battery life with one battery	5 years
estimated battery life with two batteries	10 years

Operating Environment

operating temperature range	0 to 49 °C
storage temperature range	-34 to 60 °C
relative humidity	0 - 90% non-condensing

Weight and Dimensions

dimensions	45 x 115 x 31 mm (L x W x D)
weight	88
typical RF power output	10 mW