GE LOGIQ e User Manual

LOGIQ e Quick Guide Direction 5130174-100 Rev. 2 28
Post Processing
Using CINE
Activating CINE
Press Freeze, then roll the Trackball to activate
CINE. To start CINE Loop playback, press Run/
Stop Softkey on the primary menu. To stop CINE
Loop playback. press Frame by Frame(Run/Stop)
Softkey on primary menu.
Quickly Move to Start/End Frame
Press First to move to the first CINE frame; press
Last to move to the last CINE frame.
Start Frame/End Frame
Press the Start Frame Softkey to move to the
beginning of the CINE Loop. Adjust the Start
Frame Softkey rightward to move forward through
the CINE Loop. Adjust the Softkey leftward to move
backward through the CINE Loop.
Press the End Frame Softkey to move to the end of
the CINE Loop. Adjust the End Frame Softkey
rightward to move forward through the CINE Loop.
Adjust the Softkey leftward to move backward
through the CINE Loop.
Adjusting the CINE Loop Playback Speed
Adjust the Loop Speed Softkey to increase/
decrease the CINE Loop playback speed.
Moving through a CINE Loop Frame By
Frame
Adjust the Frame by Frame Softkey to move
through CINE memory one frame at a time.

GE LOGIQ e Specifications

General

Brand	GE
Model	LOGIQ e
Category	Medical Equipment
Language	English