NX-148E LCD Keypad
22
Expansion
Box tamper
A box containing an expansion device
has been opened.
Expansion
Low Battery
An expansion power supply has a low
battery.
Expansion
Over-current
A short circuit of an expansion devices’
power supply has occurred.
Expansion
Power trouble
The main power to an expansion power
supply is not on.
Expansion
Siren trouble
Open circuit has occurred on the bell or
siren circuit of the expander
Expansion
RF Jammed
A radio receiver is being jammed.
(Not applicable to all controls.)
Expansion
Trouble
An expansion device or keypad is not
reporting to the control panel.
Zone
Lost, Press r
A wireless or multiplexed zone device
is not reporting to the control. Press
[r] to identify the zone.
Zone
Low Batt, Press r
A wireless device has a low battery.
Press [r] to identify the zone.
Zone
Tamper, Press r
A zone is tampered. Press [r] to
identify the tampered zone.
Zone
Trouble, Press r
A zone is experiencing some form of
trouble (probably wiring). Press [r] to
identify the zone.
To Next Page
Need help?
General