POWER Light is “on” when
AC power is present; flashes
to indicate a low battery
condition.
READY Light is “on” when
the system is ready to arm;
flashes if ready to “force
arm”.
SERVICE Light is “on” to
indicate a trouble condition with
your system.
NX-8E SYSTEM
KEYPAD
Includes model
ARMED Light is “on” when
armed; “off” when disarmed;
flashes to indicate a previous
alarm.
INSTANT Light is “on” when
there is no entry/exit delay.
FIRE Light is “on” to indicate
fire alarm; flashes to indicate a
trouble condition with your
fire system.
ZONE LIGHTS are “on” steady
to indicate bypass; slow flash
for zone fault; rapid flash for
service condition.
PULL OUT ZONE ID TAB
NOTE: Some of the features described above may or may not be available for your system. Check with your installation company
to find out how
To Next Page
Loading...
Need help?
General
