GE PCGS960 User Manual

29-6181 25
CARE AND CLEANING: Oven Light
Oven Light
WARNING
SHOCK OR BURN HAZARD: Before replacing oven light bulb, disconnect the electrical power to the
oven at the main fuse or circuit breaker panel. Failure to do so may result in electric shock or burn.
CAUTION
BURN HAZARD: The glass cover and bulb should be removed when cool. Touching hot glass with
bare hands or a damp cloth can cause burns.
Oven Light Replacement
NOTE: The glass cover should be removed only when
cold. Wearing latex gloves may offer a better grip.
Before replacing the bulb, disconnect electrical power to
the oven at the main fuse or circuit breaker panel. Let
the bulb cool completely before removing it. For your
safety do not touch a hot bulb with a damp cloth. If you
do the bulb may break.
To remove:
Turntheglasscovercounterclockwise1/4turnuntilthe
tabs of the glass cover clear the grooves of the socket
and pull the cover off. Remove the bulb.
To replace:
Putinanew40-wattappliancebulb.Placethetabsof
the glass cover into the grooves of the socket. Turn the
glasscoverclockwise1/4turn.
NOTE:
■ A40-wattappliance
bulb is smaller than
astandard40-watt
household bulb.
■ Reconnect electrical
power to the oven once
the new bulb is installed.
■ For improved lighting
inside the oven,
clean the glass cover
frequently using a wet
cloth. This should be
done when the oven is
completely cool.
Bulb
Socket
Tab
3
1
⁄2”
(8.9cm)
Max
length
Glass cover

GE PCGS960 Specifications

General

Brand	GE
Model	PCGS960
Category	Ranges
Language	English