Simon XT System Manual
https://alpha.adt.com/help/64[11/12/2018 9:41:49 PM]
Simon XT System Manual
« Help Center
System
Overview
Arm & Disarm
the System
Panic Alarms Trouble
Conditions
User Access
Codes
System Testing Other System
Information
System Overview
Overview
Your security system is made up of a control panel, one or more keypads and various sensors and
detectors. The control panel will be mounted out of the way in a utility closet or in a basement.
All the keypads have an audible indicator and command entry keys. The LED keypads have a group of
zone and system status lights. The LCD keypad has an alphanumeric liquid crystal display (LCD). The
keypad is used to send commands to the system and to display the current system status. The keypad(s)
will be mounted in a convenient location inside the protected premises close to the entry/exit door(s).
The security system has several zones of area protection and each of these zones will be connected to
one or more sensors (motion detectors, glassbreak detectors, door contacts, etc.). A sensor in alarm will
Select
To Next Page
Need help?
General
