About the sensor features. C pp,ancescom
Covered
Vented
Dry off dishes so they
don't mislead the sensor.
Humidity Sensor
What happens when using the Sensor Features:
Tile Sensor Features detect tile increasing humidi b,
released during cooking. The oven automatically
adjusts the cooking time to various Q,pes and
amounts of fi)od.
Do not use the Sensor Features twice in succession
on the same fi)od portion--it may result in severely
oxercooked or burnt fi)od. If fi)od is undercooked
after the countdown, use Time Cook fi)r additional
cooking time.
The proper containers and covers are essential fi)r
best sensor cooking.
Always use microwave-sate containers and cover
them with lids or vented plastic wrap. Never use
tight sealing plastic containers--they can prevent
steam tiom escaping and cause fi)od to overcook.
Be sure the outside of the cooking containers and
the inside of the microwave oven are dry befi)re
placing fi)od in the oven. Beads of moisture
turning into steam can mislead the sensor.
NOTE: Do not use
this feature twice in
sHccession on the same
food portion--# may
result in severely
overcooked or
burnt food.
Beverage
Press BEVERAGE once to heat an 8-10 oz cup of
coftce or other beverage.
Brinks heated with the Beverage feature may be very
hot. Remove the container with care.
If fi)od is m_dercooked after the countdown use
Time Cook fi)r additional cooking time.
21
To Next Page
Loading...
Need help?
General
