GE Spacemaker XL JVM1850 User Manual

35
Consumer Support
Troubleshooting TipsOperating InstructionsSafety Information
Cooktop Light/Night Light
On models JVM1850 and JVM1851, replace the
burned-out bulb with a 40-watt incandescent bulb
(WB36X10003), available from your GE supplier.
On model JVM1860, replace the burned-out bulb with
a 20-watt halogen bulb (WB36X10213), available from
your GE supplier.
To replace the bulb(s), first disconnect the
power at the main fuse or circuit breaker panel
or pull the plug.
Remove the screw at the
right edge of the
light cover and push on the left edge of the
cover to open.
Be sure the bulb(s) to be replaced are cool
before removing. After breaking the adhesive
seal, remove the bulb by gently turning.
Replace the screw. Connect electrical power
to the oven.
4
3
2
1
Replacing the lightbulbs.
www.geappliancescanada.com
Oven Light
Replace the burned-out bulb with a 20-watt halogen
bulb (WB36X10213), available from your GE supplier.
To replace the oven light, first disconnect the
power at the main fuse or circuit breaker panel
or pull the plug.
Remove the top grille by taking out the 3 screws
that hold it in place and sliding the grille to the
left (opening the door makes grille removal
easier).
Next, remove the screw located above the door
near the center of the oven that secures the
light housing.
Replace the grille and screws. Connect electrical
power to the oven.
4
3
2
1
Screws
Remove
screw

GE Spacemaker XL JVM1850 Specifications

General

Brand	GE
Model	Spacemaker XL JVM1850
Category	Microwave Oven
Language	English