Shelf Positions
,-
,, s
How to rearrange
your shelves
Shelves in the fresh food and
freezer compartments are adjust-
able, enabling you to make efficient
shelf arrangements to fit your
family’s food storage needs and
change them when your individual
requirements call for more or less
room between shelves.
Adjustable Shelves in
Fresh Food Compartment
F
(on models so equipped)
I
To remove shelves: Tilt shelf up
at front, then lift it up and out of
tracks on rear wall of refrigerator.
To replace shelves: Select desired
shelf height. With shelf front raised
slightly, engage top lugs in tracks
at rear of cabinet. Then lower front
of shelf until it locks into position.
Tempered glass shelves (on models
so equipped) are adjustable in the
same manner.
Multi-Position Shelves in
Freezer Compartment
(on models so equipped)
Shelf supports at various levels in
the freezer compartment let you
reposition the shelves from time to
time to better accommodate your
variable inventory of frozen foods.
To reposition shelves:
I
\
{1
1. While pressing tabs on shelf
supports on right wall, lift shelf out
of grooves in supports.
If shelf supports at desired level on
right wall do not have tabs, merely
lower shelf into place on supports.
Juice-Can Rack
(On
models so equipped)
Cans of frozen juice are easily
accessible when stored in the rack
on the freezer compartment door.
El
Additional
cans go here
El
Place first
can here
2. Pull shelf sideways until shelf
rods come out of holes on left wall.
3. Select desired shelf height and
insert shelf rods into holes on left
wall. If shelf supports at desired
level on right wall have tabs, lower
shelf into grooves on support while
pressing tabs. Be sure shelf wire
is fully inserted into grooves.
To load it, place first can in bottom
opening of rack. Then load additional
cans into the rack from the top.
Part No. 468307P08
To Next Page
Loading...
Need help?
General
