Drawer Removal
Drawers at bottom of fresh food
compartment will stop before coming
all the way out of refrigerator to help
prevent contents from spilling onto
floor. Drawers can easily be removed
by tilting up slightly and pulling past
“stop” location.
To remove drawers when the fresh
food compartment door cannot be
opened fully, follow the procedure
that’s applicable to your model.
1
Full-Width Drawers
L
1. If your refrigerator has adjustable
1
(cantilever) shelves, temporarily
locate bottom adjustable shelf higher
up in cabinet.
2. Pull vegetable drawer part-way
out. Reach in, push rear of cover
up and, at the same time, push it
back until it clears front-corner
retainers.
,.-
3. Tilt and remove the cover.
4. Tilt and remove the drawer.
On models with full-width meat
drawer:
5. Grasp rear of flexible meat pan
cover, bend it upward and push it
back until notch on right of cover
lines up with tab on cover support.
L
.. .
6. Tilt cover and take it out.
7. Tilt and remove the drawer.
After cleaning, reverse procedure
to replace.
Half-Width Drawers
1. Pull the upper left drawer
straight out.
3. Slide the upper right drawer and
cover to the left and remove them.
4. Pull the meat drawer straight out,
then lift its cover and remove it.
5. Slide the bottom right drawer and
cover to the left and remove them.
Simply replace in reverse order,
making sure grooves at rear of covers
engage supporting rods at rear of
refrigerator. Meat drawer must be
returned to the lower left position.
7
Part No 468307P08
To Next Page
Loading...
Need help?
General
