16 49-2000733 Rev. 1
TROUBLESHOOTING TIPS
TROUBLESHOOTING TIPS
Save time and money! Review the charts on the following pages first and you may not need to call for service.
Problem Possible Cause What To Do
Fan does not work The vent is not fully extended. Press the button on the top cover.
Vent does not work The vent is not plugged into an outlet. Plug the vent into a 120V power outlet.
The button did not engage the lift
motor.
Hold down the button for a couple of seconds
to activate the motor.
The circuit breaker may have tripped. Check the circuit breaker— reset if necessary.
Sufficient makeup (replacement) air is
required for exhausting appliances to
operate to rating.
Check with local building codes, which may
require or strongly advise the use of makeup
air. Visit GEAppliances.com for available
makeup air solutions.
To Next Page
Loading...
Need help?
General
