13
The control has a series of tones that will sound at different times. These
tones may sound while you set the control for an oven function or at the
end of the oven function. They will also alert you when an incorrect time
or temperature has been entered or if there is a problem with the oven.
Tones While Setting the Control Preheat Notification Tone
When you press a touch pad you will hear a beep.
This beep will let you know you have placed enough
pressure on the pad to activate it.
When you set an oven temperature the oven
automatically starts to heat. When the temperature
inside the oven reaches your set temperature a tone will
sound to let you know to place the food in the oven.
Tones at the End of a Timed Cycle
At the end of a timed cycle, 3 short beeps will sound
followed by one beep every 6 seconds, until the
CLEAR/OFF pad is pressed. This continuous
6 second beep may be canceled.
To cancel the 6 second beep:
1. Press the BAKE and BROIL
HI/LO pads at the same time
for 2 seconds until the display
shows “SF.”
2. Press the KITCHEN TIMER ON/OFF
pad. The display shows “CON BEEP”
(continuous beep). Press the KITCHEN
TIMER ON/OFF pad again. The display
shows “BEEP.” (This cancels the one
beep every 6 seconds.)
3. Press the START pad.
SPECIALFEATURES OFYOUR OVEN CONTROL
(on models with number pads only)
Your new touch pad control has additional features that you may choose to
use. The following are the features and how you may activate them.
The special feature modes can only be activated while the display is
showing the time of day clock.
They remain in the control’s memory until the steps are repeated. When the
display shows your choice press the START pad. The special features will
remain in memory after a power failure.
Attention Tone
This tone will sound if you set an invalid function or try to set an additional
function. The tone can be quickly identified by watching the display messages.
Oven Control, Clock and Timer Special Features of Your Oven Control
To Next Page
Loading...
Need help?
General
