2
Gerhard Geiger GmbH & Co. KG | 100W1537 1114V001en
EN
EN
1. General information
Dear customer,
By purchasing a GEIGER motor you have decided on a quality product from GEIGER.
Thank you very much for your decision and the condence placed in us.
Before you put this drive into operation please observe the following safety instructions. It
serves for the prevention of danger and for the avoidance of personal injury and damage to
property.
The installation and operating instructions contain important information for the installer, the
specialist electrician and the user. Please pass on these instructions if you transfer the product.
These instructions should be kept by the user.
2. Guarantee
In the case of incorrect installation contrary to the installation and operating instructions and/
or constructional modication, the legal and contractual guarantee for property damage and
product liability lapses.
Index
1. General information ............................................................................2
2. Guarantee .............................................................................................2
3. Intended use ........................................................................................3
4. Safety instructions ..............................................................................3
5. Safety instructions for assembly ....................................................... 3
6. Assembly note .....................................................................................4
7. Installation instructions ......................................................................5
8. Information for the specialist electrician ..........................................7
9. Setting of the end stops .....................................................................7
10. Activate the programming mode ......................................................8
11. Programming/changing the end stops ..............................................8
12. Referencing on the limit stop switch .................................................9
13. Enable/disable reference cycles ........................................................9
14. Resetting to factory settings ..............................................................9
15. Obstacle detection and anti-freeze protection .................................9
16. What to do if… ...................................................................................10
17. Maintenance .......................................................................................10
18. Technical data .................................................................................... 10
19. Declaration of conformity .................................................................11
20. Notes on waste disposal ..................................................................12
To Next Page
Loading...
Need help?
General
